1. Preparation for Analysis
Before starting the analysis, ensure that the App Connectivity of your device is set to AVAILABLE in the MyReveal App.
If the Internet Status is Online:
Saved analyses will be sent to the cloud system and can be accessed from past analyses.
If the Internet Status is Offline:
Saved analyses will be stored in the device’s internal memory, but past analyses will not be accessible.
When the Internet status is changed to Online, saved analyses in the device’s memory will sync to the cloud system, allowing access to past analyses.
2. Starting the Analysis
In the app, tap Analyze Now. This will display settings such as the live camera stream, camera focus, and analysis method.
Open the device drawer and place the ring, stone, or item you wish to analyze on the appropriate tray. Close the drawer.
For Optimal Focus:
Press the Auto Focus button. If the focus is not clear enough, you can manually adjust it.
3. Choosing an Analysis Method
Select one of the following analysis methods based on your needs:
Quick Analysis:
Captures fewer photos and provides basic results.
Standard Analysis:
Captures more photos and includes partial exposure settings in the results. (Recommended method)
Detailed Analysis:
Captures the most photos and provides full exposure settings in the results.
Note: If you stay on this page for more than 45 seconds, the camera light may turn off. In this case, you can tap "Back" and then "Start Analysis" again or remove and reinsert the drawer.
4. Conducting the Analysis
Tap the Analysis button. The duration of the analysis will vary depending on the selected method.
The analysis results will appear on the screen once the process is complete.
Important: If you close the app during the analysis, the process will be canceled.
5. Reviewing the Analysis Results
Analysis results provide various viewing options, including Result, Daylight, Fluorescent, and Phosphorescence.
Detailed Features:
Tap the button in the lower-left corner to access detailed analysis options:
Single View: Displays one image on the screen.
Top/Bottom View: Displays two images side-by-side for comparison.
Top/Bottom Split View: Uses a split format to compare two images within a single view.
To zoom In or zoom Out, you can use two fingers with a pinch motion on the screen. You can press the Refresh button to return the image to the default.
Exposure Settings:
For Standard and Detailed analyses, use the Exposure (Exp) setting to review results under different exposure levels.
Note:
If the Reveal device software version is 0.1.110 or higher, the Reference Stones feature has been added to the Analysis Results Review section. With this feature, you can compare analysis results more effectively and conduct more detailed evaluations.
For more information, please refer to the Viewing and Reviewing Saved Analyses with Reveal Diamond Detector 2 document, specifically the Reviewing Analysis Results section.
6. Saving the Analysis
If you want to save the analysis for future reference:
Tap the Save button in the lower-right corner.
Enter the required information and descriptions for the analysis.
If the Internet Status is Online:
The analysis will be saved to the cloud system and can be accessed from past analyses.
If the Internet Status is Offline:
The analysis will be saved in the device’s memory but will not appear in past analyses.
By following these steps, you can use the Reveal Diamond Detector 2 effectively and perform detailed analyses with accuracy.